Industrial managed L2 + switches with 4x 10 / 2.5 / 1G and 8/16/24/32 ports 10M / 100M / 1G RJ45 PoE ÷ High PoE or SFP 100 / 1000M slots
Industrial managed L2 + switches with 4x 10 / 2.5 / 1G and 8/16/24/32 ports 10M / 100M / 1G RJ45 PoE ÷ High PoE or SFP 100 / 1000M slots
| IEEE 802.3 10Base-T Ethernet |
| IEEE 802.3u 100Base-TX Fast Ethernet |
| IEEE 802.3u 100Base-FX Fast Ethernet Fiber |
| IEEE 802.3ab 1000Base-T |
| IEEE 802.3z Gigabit Fiber |
| IEEE 802.3x Flow Control and Back-pressure |
| IEEE 802.1AB Link Layer Discovery Protocol (LLDP) |
| IEEE 802.1p Class of Service (CoS) |
| IEEE 802.1Q VLAN |
| IEEE 802.1ad QinQ |
| IEEE 802.1D- Spanning Tree Protocol (STP) |
| IEEE 802.1D-2004 Rapid Spanning Tree Protocol (RSTP). |
| IEEE 802.1s Multiple Spanning Tree Protocol (MSTP) |
| IEEE 802.3ad Link Aggregation Protocol (LACP) |
| IEEE 802.1x Port Based Network Access Protocol |
| IEEE 802.3az EEE |
| IEEE 802.3af/at type 1/2 and PoE+ up to 30W per port, maximum on all ports 500W |
| IEEE 802.3bt High PoE up to 90W per port, 500W maximum on all ports |
| ITU K.44 – built-in secondary overvoltage protection on RJ-45 for transmission path, 4kV, 10/700us compliant: Resistibility tests for telecommunication equipment exposed to overvoltages and overcurrents – Basic Recommendation |
| IPv4, IPv6, ARP, ICMP, TCP, UDP, DNS |
| IGMP v1,v2,v3, MLD v1, v2, GMRP, GVRP, |
| SNMP v1/v2c/v3, |
| DHCP client/server |
| NTP client/server, SNTP, |
| IEEE1588 PTP v2 (only available in 402.2), |
| Synchronous Ethernet (only available in 402.2) |
| HTTP, HTTPS, Telnet, SSH v2, Syslog |
| EtherNet/IP, SNMP Inform, RMON, LLDP, LLDP-MED . |
| MIB-II, Ethernet-Like MIB |
| IEEE 802.1x Port Based Network Access Protocol, EAP, TACACS+, RADIUS, NAS |
| PN-EN 55035:2017-09 |
| PN-EN 55032:2015-09 |
| PN-EN IEC 62368-1:2020-11 |
| PN-EN 60825-1:2014-11 |
| EMC 2014/30/EU |
| LVD 2014/35/EU |
| IEC 61000-4-2 |
| IEC 61000-4-3 |
| IEC 61000-4-4 |
| IEC 61000-4-5 |
| IEC 61000-4-6 |
| IEC 61000-4-8 |
| IEC 61000-4-11 |
| IEC 61000-4-12 |
| IEC 61000-4-29 |
|
Ethernet connectors: 4 x 1G/2.5G/10Gbps SFP+, 8/16/24/32 x 10/100/1000 Mbps RJ45 ports or slots |
| Unlocked matrix: 160Gbps |
| Forwarding: 108-84 Mpps depending on number of ports |
| QoS: Support for 8 physical queues, Weighted Round Robin algorithm and Strict queuing. Priority. Priority settings based on: 802.1p PCP priorities, DSCP/ToS, port-based priority settings Priority settings on ports, configurable priorities based on port numbers TCP/UDP |
| VLAN: 4094 VLAN entries, 802.1Q, 802.1QinQ, private VLAN, VLAN translation |
| Flow Control: Flow Control – controls the packets sent and received to prevent buffer overflow, i.e. loss of data |
| Storm protection: filtering for incoming traffic of type Broadcast, Multicast, Unknown DA or all packets, filtering of outgoing traffic for packets of all types, bit rate limiting |
| Security: HTTP/HTTPS, SSL/SSH, IEEE 802.1x Port Based Network Access Protocol, EAP, TACACS+; RADIUS – authentication, authorisation and accounting functions – AAA |
| IGMP snooping: V1/V2/V3, IGMP Filtering/ Throttling, IGMP query, IGMP proxy reporting, MLD snooping V1/V2 |
| Syslog – cooperation with the syslog server, |
| Port Mirroring: Monitoring traffic on selected ports |
| IEEE 802.3az: Energy Efficient Ethernet, zmniejszenie pobieranej energii, 4 tryby |
| Port Trunk: IEEE 802.3ad LACP lub agregacja statyczna |
| RMON, MIB II, Port mirroring, DNS, IEEE802.1ab LLDP, LLDP-MED |
| Optional L3 – static routing |
|
Network redundancy
|
| MAC address table: up to 32k entries |
| ITU K.44 – built-in secondary, 4kV, 10/700us overvoltage protection in TRX.1 modules on RJ-45 ports for the transmission path in accordance with the requirements: Resistibility tests for telecommunication equipment exposed to overvoltages and overcurrents – Basic Recommendation |
|
Reflectometer test in a UTP module: Each RJ45 port can carry out a test |
| The unit is equipped with a TCXO on-board generator |
| NTP protocol in server/client mode and SNTP |
IEEE 1588-2008 v2 PTP – the following hardware-supported profiles are available in version 402.2 precise time synchronisation based on IEEE1588 v.2 (PTPv.2): default 1588, G.8265.1 and G.8275.1 in the following modes:
|
| Optional synchronisation with Power Profiles IEEEC37.238-2011, IEEEC37.238-2017 and Power Utility Profile IEC/IEEE 61850-9-3 |
| Version 402.2 licensed support Synchronous Ethernet, G.8261 on the ports of the optical |
| Time: 451000 hrs. |
| Standard: Telecordia , SR-332 |
| SNMP v1 / 2c / 3, |
| HTTP / HTTPS protocol – management via a web browser |
| SSH v2, TELNET |
| Local CLI console (RS-232) – RJ45 connector |
| “Privilege level” – permission level configuration – read / write, independently configured for many users |
| DC 36-60V, 80-350V power supply |
| AC 75-240V power supply |
| Optional two power inputs – redundant, AC + AC or only DC + DC |
| Power supply redundancy supported by Load Balance function |
| Power supply 80-350V DC/75-240V AC does not support PoE |
| Screw terminals for AC and DC power |
| Total power consumption (without PoE ports) – < 50W |
| Compliant with IEEE802.3af, IEEE802.3at, IEEE802.3bt standards |
| Power available for each port up to 90W |
| For 55VDC power supply, the maximum total PoE power is 500W |
| 19 ”1U chassis |
| Dimensions [440x325x43] mm |
| Metal housing IP-30 |
| Weight about 3.68 kg |
| Working temperature: -40 to + 85 ° C with a minimum air flow of 0.4 m / s |
| Working temperature: -40 to + 70 ° C with a minimum air flow of 0.0m / s |
| The working time at the maximum temperature of + 85 ° C is up to 16 hours |
| Standard operating ambient humidity: 0 to 95% (non-condensing) |
| Location type: class C in accordance with PN-EN 60870-2-2 – sheltered locations |
| Protection class in accordance with IP-30 |
