Przeskocz do treści Przeskocz do menu

Tytan

TYTAN

The device is intended for users with a demand for fast packet traffic and classic voice connections. The device transports up to four streams of Gigabit Ethernet frames and 8/16 streams E1 2.048 Mbit / s through the optical path. The device can perform optical transmission from the line side with the use of one or two SFP line ports.

Fibre optic multiplexer TYTAN

Properties and Benefits

  • Connection of four Gigabit Ethernet networks and 16/8 E1 channels 2048 kbit / s G.703 / 704 via optical link
  • Possible protection of the connection on the line port
  • Cooperation of line ports with SFP modules with a bit rate of 1.25-4.25Gbit/s
  • FEC error correction
  • 4 Gbit / s Ethernet stream transmission (using both line ports) or 2.2 Gbit / s (using a single line port)
  • Physical separation of SFP Ethernet interfaces
  • SNMP, WWW, TELNET management, RS232 console, SNTP, SMTP, Syslog support
  • Redundant power supply, 2 power connectors, 230V AC, and 48V DC

Catalog card

Fibre optic multiplexer TYTAN

Product card

Haven’t found the answer to your bothering questions?

  • Supported transmission standards
    IEEE 802.3 10Base-T Ethernet
    IEEE 802.3u 100Base-TX Fast Ethernet
    IEEE 802.3u 100Base-FX Fast Ethernet Fiber
    IEEE 802.3 10Base-T Ethernet
    IEEE 802.3u 100Base-TX Fast Ethernet
    IEEE 802.3u 100Base-FX Fast Ethernet Fiber
    IEEE 802.3ab 1000Base-T
    IEEE 802.3z Gigabit Fiber
    IEEE 802.3x Flow Control and Back-pressure
    IEEE 802.1p Class of Service (CoS)
    IEEE 802.1Q VLAN
    IEEE 802.1ad QinQ
    IEEE 802.3az EEE
  • Supported protocols
    SNMP v1, NTP, SMTP, RMON
    HTTP, Telnet, Syslog, SNMP Inform, NTP Client
  • Supported standards, recommendations and directives EMC, safety *
    PN-EN 55011:2012
    PN-EN 55024:2011/A1:2015-08
    PN-EN 60950-1:2007/A2:2014-05
    EMC 2004/108/WE
    LVD 2006/95/WE
    IEC 61000-4-2
    IEC 61000-4-3
    IEC 61000-4-4
    IEC 61000-4-5
    IEC 61000-4-6
    IEC 61000-4-8
    IEC 61000-4-11
    IEC 61000-4-12
    IEC 61000-4-29
  • Ethernet interfaces
    Ethernet interfaces: 4 x 10/100/1000 Mbit / s RJ45, 3 x 1000Mbit / s SFP (range depending on the parameters of inserts up to 200 km for 100Mbit / s 100BASE-FX)
    QoS: Support 8 physical queues, Weighted Round Robin algorithm and Strict Priority Queuing. Priority settings based on: PCP 802.1p, DSCP / ToS priorities, port priority settings, the ability to configure priorities based on TCP / UDP port numbers
    VLAN: 4096 VLAN entries, 802.1Q
  • Management
    SNMP v1, TELNET
    HTTP protocol – management through a web browser 802.1QinQ, private VLAN, VLAN translation
    Rate Control: Inbound Filtering for Broadcast, Multicast, Unknown DA or All Packets, Outbound Filtering for All Packet Types, Rate Limiting
    Port Mirroring: Monitoring traffic on selected ports
    IEEE 802.3az: Energy Efficient Ethernet, energy reduction, 4 modes
    MAC address table: up to 8192 entries
  • Power
    DC power supply, 36 – 60VDC / 500-290mA
    AC adapter, 100-240VAC / 160-105mA
    Two power inputs, redundant power supply – optional for AC power
  • Physical features
    Housing 483x170x44mm, for 19″ cabinet
    Weight up to 2.5 kg
  • Optical ports
    Operation with the use of one or two optical ports
    Dedicated to work with SFP modules with a bit rate of 1.25-4.25Gbit / s (optional possibility to work with 3.125 Gbit / s and 2.5Gbit / s modules)
    FEC error correction
  • E1 ports
    Compliant with ITU-T G.703, 2048kbit / s
    120Ω balanced pair
    HDB-3 linear code
    Remote and local test loop
    16x RJ-45 connector
  • Environmental requirements
    Working temperature: +5 to + 40 ° C
    Operating relative humidity: 0 to 80% (non-condensing)
    Location type: class C in accordance with PN-EN 60870-2-2 – sheltered locations
    Protection class in accordance with IP-30

More information can be found in the product catalog

Instructions, CE and DWG files available only to logged in users

See more