The SE-39 converter is an unmanaged fiber-optic Ethernet converter with a switch function, which enables connection of Ethernet networks in a point-to-point topology using two devices with electrical or optical interfaces. It is equipped with an electrical interface 10/100 / 1000Mb / s RJ45, and an optical interface SFP slot 100/1000 Mb / s, enabling the change of the transmission medium.
SE 39
Unmanaged Fiber Optic Ethernet Media Converter SE 39
Properties and Benefits
- Support for 10/100/1000 Mb / s RJ45 interfaces at 100/1000 Mb/s FO SFP
- Operation in converter or switch mode
- JUMBO frame support
- Configuration by means of eight ON / OFF switches
- Device status signaling via LED diodes
- LFPT (Link Fault Pass-Through) function
- Working temperature: -40 ° to + 85 ° C
- Very small and compact dimensions of the housing
- Power 9-60VDC
-
Supported transmission standards
IEEE 802.3 10Base-T Ethernet IEEE 802.3u 100Base-TX Fast Ethernet IEEE 802.1Q VLAN -
Supported protocols
MDI/MDIX Full/half duplex LFPT (Link Fault Pass-Through) -
Supported standards, recommendations and directives EMC, safety *
PN-EN 55011:2012 EN 55022:2010/AC:2011 PN-EN 55024:2011/A1:2015-08 PN-EN 60950-1:2007/A2:2014-05 EMC 2014/30/UE LVD 2014/35/UE PN-EN 60825-1:2014-11 IEC 61000-4-2 IEC 61000-4-3 IEC 61000-4-4 IEC 61000-4-5 IEC 61000-4-6 IEC 61000-4-8 IEC 61000-4-11 -
Optical Ethernet ports
1x 100 / 1000Mb / s Slot for SFP inserts Parameters depending on the type of the specified SFP insert Signaling of correct connection 155Mb and 1.25Gb speed support -
Ethernet electrical ports
1x 10/100 / 1000Mb / s, RJ-45 Full / half duplex Auto-sense MDI / MDI-X Work with or without auto-negotiation Support for JUMBO frames up to 10KB -
Physical features
Housing dimensions [WxHxD] 90x53x35 mm Weight up to 200g DIN rail mount TH35 -
Power
Supply voltage 9-60V DC Power consumption up to 0.5 mA Connector Type: Screw Plug -
USB Host
1x miniUSB OTG -
Environmental requirements
Working temperature: -40° do +85° C Humidity: ≤ 95% w temperaturze +20°C
