Przeskocz do menu
  • Logotypy
Menu Menu Close

Hyperion 500

Hyperion 500

Industrial Ethernet switch in the 10/100 / 1000M modular system equipped with 8x slots, depending on the housing version, dedicated to the installation of advanced hot-swap modules that enable various configurations of RJ45, SFP connectors, ensuring, among others, transmission in supervision and operation of substations, to provide reliable connections between the SCADA system and network controllers, to create CCTV IP monitoring systems, to support communication on wind farms, to monitor environmental parameters in difficult conditions, to implement intelligent applications in industry.

Please contact the seller
See the Hyperion 500 datasheet Dalej

Modular Managed industrial Ethernet switch with PTPv2 time synchronization server function and 4x 1 / 2.5 / 10Gbps Hyperion 500 interfaces

Features and benefits

  • Industrial switch in a modular system with an enclosure: chassis for RACK 19" 1U rack with 8 slots, allowing the installation of hot swap modules ,
  • The modular system allows different module configurations that can have up to 32x 10/100/1000M RJ45 or SFP 32x 1001 /1000M and up to 4x 100M1 /1G/2.5G/10Gb/s SFP+
  • ITU-T G.8032 compliant ring operation with < 20ms reconfiguration ,
  • Support for STP, RSTP and MSTP protocols ,
  • DDMI - SFP module monitoring function
  • IEEE802.1x authentication, Radius, Tacacs+ - AAA,
  • Support for PROFINET Conformance Class A protocol,
  • Internal switch synchronization by GNSS signal when retrofitted with module MOD-QUAZAR-GPS,
  • The following IEEE1588 v.2 (PTPv.2)-based precision time synchronization profiles are available in the HYPERION-500 switch with hardware support: default1588, G.8265.1 and G.8275.1 ,
  • NTP protocol in server/client mode and SNTP
  • Primary surge protection in MOD-TRX modules on RJ-45 ports, ITU-T K.44 4kV 10/700us ,
  • Management IPv4, IPv6, WWW, telnet, SSH and local CLI console, SNMP v1/v2c/v3
  • Access security: SNMPv3, HTTPS, SSH,
  • Save Energy with Energy Efficient Ethernet (EEE) Technology,
  • Switch designed in accordance with requirements of IEC61850-3, IEEE1613 standards
  • Operating temperature: -40 to +85°C with appropriate conditions met,
  • Modules for redundant power supply 80-350 V DC, 75-240 V AC or 36 - 60V DC,
  • Load Balance function with power redundancy,
  • NTP in server/client mode and SNTP
Optional functions
  • When retrofitted with MOD-DMC module - security is guaranteed by IEEE 802.1ae MACsec - encryption and data integrity
  • Optionally, the device can be retrofitted with MOD-RBX module for lossless redundancy supporting IEC62439-3 Clause 4, 5 PRP/HSR protocols, also enabling PTP over PRP synchronization redundancy
Optional features included with the license
  • Extension in IEEE 1588-2008v.2 (PTPv2) with Power Profile; synchronization for real-time applications in accordance with IEEE C37.238-2011, C37.238-2017; IEC61850-9-3
  • Synchronous Ethernet G.8261 (available on optical ports)

Catalog card

Modular Managed Industrial Ethernet Switch Hyperion 500

Product card

Download

Haven’t found the answer to your bothering questions?

Contact an expert

CUS - central management module

Properties and Benefits

  • Central management module - a module used in the advanced HYPERION-500 switch with high performance, supporting up to 32 interfaces
  • High-performance CPU for managing the system of modules and Chassis
  • Uplink interface: 2x or 4x SFP + slots (1G / 2.5G / 10Gb / s) depending on the module version
  • Local RJ45 Ethernet port for management
  • Supports Synchronous Ethernet support
  • Supports IEEE 1588-2008 v2 PTP support
  • The structure was designed in accordance with the requirements of IEC61850-3, IEEE1613 standards

PSU - power supply module

Properties and Benefits

  • Power supply module for powering various housing versions and installed modules
  • Voltage range: 45 - 60V DC or 80-360V DC, 75-270VAC
  • Power up to 75W for AC or DC power
  • Connector: Terminal Block
  • Reverse polarity protection
  • The structure was designed in accordance with the requirements of IEC61850-3, IEEE1613 standards

TRX - Transceiver module 4 / 8x UTP or 8x SFP

Properties and Benefits

  • Transceiver module with UTP RJ45 ports or with SFP slots
  • SFP DDMI: Monitoring of cartridge parameters for all SFP slots
  • Support for SFP fiber inserts from any vendors
  • Secondary overvoltage protection in TRX.1 modules on RJ-45 ports, ITU-T K.44 4kV 10 / 700us
  • Reflectometer test for used pairs in the cable
  • Supports Synchronous Ethernet support
  • Supports IEEE 1588-2008 v2 PTP support
  • The structure was designed in accordance with the requirements of IEC61850-3, IEEE1613 standards

DMC - Dual media converter module

Properties and Benefits

  • 2x SFP 100 / 1000Mbit / s slot + 4x UTP RJ45 10/100 / 1000Mbit / s port with each converter
  • Two media converters in one module
  • Independent management by own IPv4, IPv6 address using HTTP / HTTPS, Telnet, SSH and SNMP v1 / v2c / v3
  • Security is ensured by the IEEE 802.1AE MACsec protocol - encryption and data integrity
  • Supports Synchronous Ethernet support
  • Supports IEEE 1588-2008 v2 PTP support
  • The structure was designed in accordance with the requirements of IEC61850-3, IEEE1613 standards.

MOD-QUAZAR-GPS - GNNS receiver module for clock synchronization

Properties and Benefits

  • Antenna input with support for active antennas with SMA connector
  • 72-channel receiver GNNS cooperating with GPS, GLONASS, BeiDou, Galileo systems
  • Internal synchronization with the GPS signal of the Hyperion-500 switch

Optional functions

  • OCXO on-board generators of various stability or RUBID

Optional features included with the license

  • Signal Input / Output 1PPS (One Pulse Per Second)
  • 10Mhz clock signal input / output
  • ToD (Time-of-Day) signal input / output
  • Synchronization signal output E1 G.703, G.704
  • Wyjście portu Ethernet (RJ45) z obsługą protokołu IEEE 1588v2 Precision Time Protocol wraz z profilami energetycznymi IEEE/IEC 61850-9-3 oraz IEEE C37.238 oraz SyncE, ITU-T G.8261, ITU-T G.8262 oraz ITU-T G.8264

RBX - REDBOX module

Properties and Benefits

  • Available interfaces: 2x SFP slot (100 / 1000Mbps) - HSR / PRP ports or interfaces 2x internal PRP Ethernet ports for communication via switch
  • 1x internal Legacy Ethernet port
  • IEC 62439-3 Clause 4 support
  • IEC 62439-3 Clause 5 support
  • The structure was designed in accordance with the requirements of IEC61850-3, IEEE1613 standards
  • Full IEEE1588-2008 PTPv2 support for the PRP and HSR protocol in the selected module version

MOD-SRL - serial port server module n

Properties and Benefits

  • 4x RS485/422/232 server module with RJ45 connectors
  • Raw socket encapsulation transmission for SERVER mode,
  • Transmission speeds from 300 to 230400 for RS232 bit/s and up to 1 Mbps on RS422/485
  • TCP and UDP protocols can operate in point-to-point or point-to-multipoint topologies,
  • Sniffer mode (duplication) on each port and data stream
  • Loop function on the serial port and data transmitted in both directions,

MOD-RTR - router module

Properties and Benefits

  • Module for creating and managing network elements and services with routing functionality.
  • It supports dynamic routing protocols: RIP, OSPF, BGP and the very fast RAY routing protocol.
  • Each port with MOD-CUS and MOD-TRX can operate in router mode.
  • Transmission speed of 1 Gbps between switch and router
  • Advanced transmission security using IPSEC protocols with support for AES256 or VERNAMA algorithms,
  • Virtual Private Network-VPN support
  • Built-in software firewall at Layer 3.
  • Switching to an alternative route in less than 100 ms.
  • Lossless redundancy with VRRP and ZeroLoss protocol.
  • Support for up to five independent routing engines with virtual routing and forwarding technology.
  • Dynamic network address translation (NAT).
  • Easy routing configuration with ZeroCfg.
  • General specification of supported standards and protocols
    IEEE 802.3 10Base-T Ethernet
    IEEE 802.3u 100Base-TX Fast Ethernet
    IEEE 802.3u 100Base-FX Fast Ethernet Fiber
    IEEE 802.3 10Base-T Ethernet
    IEEE 802.3u 100Base-TX, 100Base-FX Fast Ethernet
    IEEE 802.3ab 1000Base-T
    IEEE 802.3z Gigabit Fiber
    IEEE 802.3ae 10GBASE-SR/LR/ER/ZR (SFP+) 10 Gigabit Ethernet
    IEEE 802.3x Flow Control and Back-pressure
    IEEE 802.1p Class of Service (CoS)
    IEEE 802.1Q VLAN, up to 4095 active VLANs
    IEEE 802.1ad QinQ
    IEEE 802.3ad Link Aggregation Protocol (LACP)
    IEEE 802.1AB Link Layer Discovery Protocol (LLDP)
    IEEE 802.1ak Multiple Registration Protocol (MRP, GARP, GVRP)
    IEEE 802.3az Energy Efficient Ethernet
  • Network redundancy
    IEEE 802.1D Spanning Tree Protocol (STP)
    IEEE 802.1D-2004 Rapid Spanning Tree Protocol(RSTP)
    IEEE 802.1s Multiple Spanning Tree Protocol (MSTP)
    ITU-T G.8032 v2 Ethernet Ring Protection Switching, Major Ring, Sub Ring – DHP dual homing protection
    ITU-T G.8031 Ethernet Linear Protection Switching 1+1, 1:1
    Each of the redundancy protocols listed above is available on all ports and on all modules except the management port on the CUS module
    IEC 62439-3 Clause 4, 5 PRP /HSR – supported by an additional Redbox module
    Redundancy of PTP over PRP synchronization in the network using the MOD-RBX module
  • Network security
    IEEE 802.1x Port Based Network Access Protocol, EAP, TACACS +, RADIUS – Authentication, Authorization and Accounting – AAA
    IEEE 802.1ae MAC security (MACsec) – data encryption and integrity using the DMC module
  • Network synchronization
    NTP protocol in server/client mode and SNTP ,
    IEEE 1588-2008 v2 PTP – standard support for synchronization with the 1588 profile in peer to peer, end to end and one step, two step modes:
    • Time error for Master clock mode typically 40ns ,
    • Time error for Transparent clock mode typically 50ns,
    • Time error for BC (Boundary clock) mode typically < 200ns,
    • Time error for BC (Boundary clock) with SyncE mode typically <100ns ,
    • Slave,
    Optional synchronization with Power Profile IEEEC37.238-2011, IEEEC37.238-2017 and Power Utility Profile IEC/IEEE 61850-9-3,
    Licensed support for Synchronous Ethernet, G.8261 : (Timing and synchronization aspects in packet networks) on optical ports
  • Ethernet interface
    Store-and-forward mode of operation
    Up to 32x RJ45 (10/100/1000M) or SFP (100/1000M) ports,
    Jumbo frame: 9600 B
    Packet buffer size: 4 MB
    Switching capacity: 160 Gbps,
    Forwarding: maximum 108 Mpps,
    Mac board: 32k
    VLANS: 4094 VLAN entries, 802.1Q, 802.1QinQ, private VLANs, VLAN translation,
    QoS: Support for 8 physical queues
    Storm protection: filtering for incoming traffic of Broadcast, Multicast, Unknown DA or all packets, outgoing traffic filtering for packets of all types, bandwidth limiting,
    IGMP snooping V1/V2/V3, IGMP Filtering/ Throttling, IGMP query, IGMP proxy reporting, MLD snooping V1/V2
    Port Mirroring: copy network traffic to a specific port, monitor traffic on selected ports
    Port Loop Protection,
    RMON, MIB II, DNS, DHCP .
  • Management
    IPv4, IPv6, ARP, ICMP, TCP, UDP, DNS
    DHCP Client, Server, Relay Option 82
    The processor has up to 10 interfaces with different IP addresses, separated by a VLAN
    Access permission: password, source IP configurable range
    Access level configuration – read / write, independently configured for many users
    HTTP, HTTPS – the device has a self-signed certificate installed, but it is possible to install another certificate
    Telnet, SSH, NTP, TFTP, Syslog – cooperation with the syslog server
    SNMP v1 / v2c / v3, SNMP trap, inform
    Local (Ethernet / RS-232) and Remote CLI
    System event and alarm log
    MIB II
  • Work environment requirements
    Working temperature: -40 to + 85 ° C with a minimum air flow of 0.4 m / s.
    Working temperature: -40 to + 70 ° C with a minimum air flow of 0.0m / s
    The working time at the maximum temperature of + 85 ° C is up to 16 hours
    Standard operating ambient humidity: 5% -95%
  • Supported standards, recommendations and EMC and safety directives
    PN-EN 55035:2017-09
    PN-EN 55032:2015-09
    PN-EN IEC 62368-1:2020-11
    PN-EN 55011:2016
    PN-EN 60825-1:2014-11
    EMC 2014/30/EU
    LVD 2014/35/EU
    IEC 61000-4-2
    IEC 61000-4-3
    IEC 61000-4-4
    IEC 61000-4-5
    IEC 61000-4-6
    IEC 61000-4-8
    IEC 61000-4-11
    IEC 61850-3:2014
    IEEE 1613-2009
  • MTBF

    Switch contents

More information can be found in the product catalog

Download the Hyperion 500 catalog
Plik BitStream Hyperion 500 - Brief

Manuals, CE and DWG files available only for logged-in users

See more

  • Offer

    Current product offerings from BitStream.

    Zobacz

  • Realizations

    Complex projects implemented by BitStream.

    Zobacz

  • Career

    Current vacancies for technical and clerical positions.

    Zobacz

  • Contact

    Contact details of Bitstream.

    Zobacz

Adres st. Mełgiewska 7/9 20-209 Lublin

Telefon (+48) 81 743 86 43

Ikona poczty e-mail info@bitstream.pl

Menu

Information

Logotypy

© BitStream 2024