Fiber optic multiplexer with eight I / O interfaces and RS-232 / RS-485/422 interface. Transparent transmission of the data stream, combining information from I / O and RS232 / 422/485 ports, creates a flexible spectrum of potential applications, where it is important to have the shortest delay time provided by devices and no interference in the structure of the transmitted data.
| Screw connection for wire with cross-section up to 3mm 2 |
| Four comparator inputs with a fixed threshold of V in = 154V DC or other – configurable at the device production level |
| Four parametric inputs (configurable via CLI) with variable trigger level V in = 12, 24, 48, 110, 125, 220, 250V DC |
| Working range: between 0.8 and 1.1 V in, nom with disturbances up to 15% of V in, nom |
Power consumption at the inputs:
|
| Isolation between inputs greater than 50MΩ / 500V |
| Noise filtering on parametric inputs in accordance with the ESI 48-4 EB2 standard |
| Screw connection for a wire with a cross-section of: up to 3mm 2 |
| 8 outputs with NO / NC contacts |
| Maximum rated voltage of contacts: 400V AC / 250V DC |
| Continuous current: 8A / 250V AC, 8A / 24VDC, 0.4A / 250V DC |
| Maximum continuous current: 10A / 20ms |
| Maximum switching power: 2000 W (VA) |
| Utilization category: AC1, AC15, AC3, DC1, DC13 |
| Switching capacity: 1000W (VA) at L / R = 40 ms |
Current interruption:
|
Two modes of operation
|
| NO / NC alarm connector |
| Entry-exit delay ≤ 17 ms |
| Delay with active load ≤ 24 ms, ESI 2, V in <250V 10uF CDT |
| PN-EN 55011:2012 |
| PN-EN 60255-26:2014-01 |
| PN-EN 60255-27:2014-06 |
| 1x RJ45 connector |
| 2x RS232 with transmission speed up to 230kbps |
| RS422 / 485 with transmission speed up to 2Mbps |
| Latency for RS232 <400ns |
| Latency for RS485 <400ns |
| DIP-SWITCH configuration |
| SM, MM, WDM, 1310nm, 1550nm |
| Fiber type 9 / 125um, 50 / 125um, 62.5 / 125um |
| SC / PC connector |
| Ranges depending on the type of optical port 15km, 50km, 120km (1550nm), 20km WDM, 40km WDM, 60km WDM |
| Version with one or two optical ports available |
| Bus or ring operation up to 4 pieces |
| DIP-SWITCH |
| CLI / RS232, 9600bps |
Supply voltage ranges (depending on the version):
|
| Power consumption up to 5W |
| Housing 166x285x50mm |
| Can be mounted on a DIN rail |
| Can be mounted to the wall |
| Weight 1.3 kg |
| Standard working temperature: -40 to + 70 ° C |
| Standard operating ambient humidity: 0 to 95% (non-condensing) |
| Location type: class C in accordance with PN-EN 60870-2-2 – sheltered locations |
| Additional security: Conformal Coating |
| Protection class in accordance with IP-30 |
