Quazar 700

Quazar-700 monitoring probe for network synchronisation using signals such as: Ethernet; PPS; 10MHz; E1 G703/G.704; ToD IRIG-B DLCS; IRIG-B AM 1kHz; PPS FO MM 850nm and additionally IEEE 1588-2008 v2 PTP with MC or BC modes, and as a network synchronisation quality analyser in its basic version it offers the ability to monitor parameters such as PTP 2WAY TE, PTP datasets, SyncE TIE, SyncE MTIE, SyncE TDEV, SSM (change logging). In addition, the ability to run RFC2544 performance tests and ITU-T Y.1564 service tests.

Contact your dealer
View the data sheet for the Quazar 700
Play Video about Quazar 700

Monitoring Probe to monitor network synchronization quality with time server function

quazar 700

Features and benefits

  • Manageable monitoring probe equipped depending on version with interfaces 4 or 8 SFP+ 1/2.5/10Gbps slots and 1x or 2x RJ45 10/100/1000Mbps ports; 1x PPS IN; 1 or 4x PPS OUT; 1x 10MHz IN/10MHz OUT; 1 x E1 G703/G.704; 1x ToD IN/ToD OUT; 2 or 4x IRIG-B DLCS; 2 or 4x IRIG-B AM 1kHz; 2x PPS ST FO 850nm
  • Supported PTP profiles: PTPv2 default IEEE 1588; ITU-T G.8275.1; ITU-T G.8275.2; ITU-T G.8265.1; IEC 61850-9-3; IEEE C37.238-2011 and 2017
  • High-performance CPU for system management
  • Built-in LCD display for reading selected parameters
  • Qualitative analysis of up to 4 IEEE1588 PTPv.2 clock domains for G.8275.1 (Telecommunications) and C37.238 (Energy) profiles
  • Qualitative analysis of up to 2 clock domains of Synchronous Ethernet with analysis of SSM ITU.T - G8264 messages.
  • Monitoring of TE (Time error) and MTIE (Time Interval Error) and possibility of graphical presentation of TE and MTIE graphs
  • Precision of reference time base synchronized from GNSS systems better than +/-15ns (Clear sky)
  • Mutisystem receiver for GPS, Gallileo, Glonass, Beidou systems
  • Built-in high-precision local oscillator depending on version OCXO, DOCXO, RUBID* for long-term holdover state support
  • Supported synchronization protocols PTPv.2, NTP, SNTP, ToD, SSM, SyncE, Sabits, NEMEA, NTRIP, RTCM, IRIG-B
  • Automatic creation of measurement data files for local data archiving
  • IEEE802.1x authentication, Radius, Tacacs+ - AAA
  • IPv4, IPv6, Http, Https, SSH and local CLI console management, SNMP v1/v2c/v3,
  • Operating temperature: -5 to +60°C
  • Redundant power supply 80-350 V DC, 75-240 V AC or 36 - 60V DC

Application

Thanks to its reliability, the Quazar 700 is used in industries such as:

Energetics

Telecommunications

Uniformed services

Finance

Data sheet

Manageable probe Quazar 700

Product card

Download the card

Haven’t found the answers to your questions?

Contact an expert

IEEE 802.3u 100Base-TX Ethernet
IEEE 802.3ab 1000Base-T
IEEE 802.3z Gigabit Fiber
IEEE 802.3ae 10GBASE-SR/LR/ER/ZR (SFP+) 10 Gigabit Ethernet
The device can be equipped with an on-board generator OCXO or DOCXO or RUBID

Synchronisation signals

  • 1 x PPS_IN and 1 or 4 x PPS_OUT;
  • 1 x 10MHz_IN and 10MHz_OUT
  • 1 x E1 G703/G.704
  • 1x ToD_IN/ToD_OUT
  • 2 or 4x IRIG-B DLCS
  • 2 or 4 x IRIG-B AM 1kHz
  • 2 x PPS ST FO 850nm

Supported synchronization protocols

  • NTP and SNTP
  • ToD
  • SSM
  • Sabits
  • NEMEA
  • NTRIP
  • RTCM
  • IRIG-B

The following IEEE1588 v.2 (PTPv.2)-based precision time synchronization profiles are hardwaresupported on the device: Default1588, G.8265.1, and G.8275.1

    • MC (Master Clock)  time error typowo 40ns
    • BC (Boundry Clock) z time error z SyncE typowo <100ns
Monitoring of possible Spoofing and Jamming interference for GNSS module
PTP datasets (logging minimum: GrandmastrID, clock class, clock accuracy, priority2, steps
removed)
Real-time monitoring of TE (Time error) and MTIE (Time Interval Error) for PTPv2 and SyncE
Presentation of real-time TE (time error) graphs in GUI (www) for PTP and SyncE
Automatic creation of measurement data files with the possibility of archiving the data in the local
memory of the device.
Dedicated QUAZARNET software – optional system to extend diagnostics and visualization of
measurement data

The following features are available under the license: 

  • PPS & ToD monitoring in ITU G.827 format 1
  • RFC2544 performance tests and ITU-T Y.1564 service tests with MPLS-TPa protocol support
  • PTP v2 synchronization with IEC 61850-9-3, IEEE C37.238-2011 or 2017 profiles
  • Synchronous Ethernet, G.8261, G.8262, G.8264
Antenna input with support for active antennas with SMA connector
RS422 interface of ToD (Time-of-Day) signal with RJ45 connector, input and input sig
Coax interface (PPS) with SMA connector, input and input signal
GNSS multi-band receiver that works with systems GPS, GLONASS, BeiDou, Galileo
GPS receiver sensitivity: -167dBm/-160dBm with LNA option.
High precision of the receiver GPS PPS: +/-15ns (Clear sky)

Can be equipped with stable on-board generators with different parameters:

  • OCXO generator with stability in the temperature range of -40 to +85°C of +/-2 ppb and holdover time of ±1.5 μs at constant temperature for 8 hours, within ±8 μs at constant temperature for 12 hours
  • OCXO generator with -40 to +85°C stability of +/-0.2 ppb and holdover time of ±1.5 μs at constant temperature for a minimum of 24 hours
  • DOCXO generator with -40 to +85°C stability of ±0.03 ppb and holdover time of ±1.5 μs at constant temperature for a minimum of 54 hours
  • RUBID generator(Option available by contacting the manufacturer) with a stability in the temperature range of -40 to +85°C of ±0.5 ppb and a holdover time of ±1.5 μs at constant temperature for a minimum of 83 hours
EAP, RADIUS
The IRG-B module implements the functionality of providing time synchronization using the PPS (Pulse Per Second) protocol in a form compatible with IRIG standard 205-87. The module will be installed in Quazar 700 devices. The number of interfaces depends on the version of the device housing

Number of interfaces in the device 1U 19”:

  •  2x IRIG-B DCLS – unmodulated 100Hz – 50 Ohm BNC connector;
  •  2x IRIG-B AM – modulated 1kHz – BNC connector 600 Ohm;
  •  2x PPS – HFBR transmit transceivers; ST 850 nm connector with 50/125 or 62.5/125 um optical
    fiber

Number of interfaces in the device 2U 19”:

  • 4x IRIG-B DCLS – unmodulated 100Hz – 50 Ohm BNC connector;
  • 4x IRIG-B AM – modulated 1kHz – BNC connector 600 Ohm;
  •  2x PPS – HFBR transmit transceivers; ST 850 nm connector with 50/125 or 62.5/125 um optical
    fiber

Interface IRIG-B DCLS::

  • Output voltage: 5 V;
  • Output current: min. 100 mA;
  • Accuracy of output relative toUTC: ± 100 ns;/li>

Interface IRIG-B AM:

  • Output voltage: 5 V;
  • Accuracy of output relative UTC: ± 1 μs.
Ethernet connectors in 19″ RACK 1U chassis: 4 slots or 8 SFP+ 1/2.5/10Gbps slots and 1x RJ45 1Gbps port depending on the version selected
 Ethernet connectors in 19″ RACK 2U chassis: 4 slots or 8 SFP+ 1/2.5/10Gbps slots and 1x RJ45 1Gbps port depending on the version selected
IPv4, IPv6, ARP, ICMP, TCP, UDP, DNS
SSH, http, https, SNMP v1/v2c/v3
Local (Ethernet/RS-232) and remote CLI
System log of events and alarms
Readout of selected parameters on the built-in LCD display
Operating temperature: -5 to 60°C
Standard ambient humidity during operation: 5%-95%
1U chassis weight: 3 kg,
 Dimensions for 1U version [mm]: 450 x 355 x 44
Dimensions for 2U version [mm]: 450 x 355 x 88
Voltage range:: 80-350VDC, 75-240VAC
Voltage range: 36-60 V DC
Connector: screw – Terminal block
PN-EN 55024:2011/A1:2015-08
PN-EN 55022:2010/AC:2011
PN-EN 60950-1:2007/A2:2014-05
PN-EN 55011:2012
PN-EN 60825-1:2014-11
EMC 2004/108/WE
LVD 2006/95/WE
IEC 61000-4-2
IEC 61000-4-3
IEC 61000-4-4
IEC 61000-4-5
IEC 61000-4-6
IEC 61000-4-8
IEC 61000-4-11
IEC 61000-4-12
IEC 61000-4-29
IEC 61850-3
IEEE 1613-2009

For more information, see the product catalog

Download Quazar 700 device catalog

Manuals, CE and DWG files available only for logged-in users

See more

Offers

BitStream’s current product range.

Realisations

Complex projects implemented by BitStream.

Career

Current vacancies for technical and clerical positions.

Contact

Bitstream’s contact details.