Magnetar 105
Router enabling access and sharing of the 2G / 3G / 4G LTE cellular network. The router provides access to devices connected locally to the LAN interfaces and the RS232 / 485 and RS-232 port.
Wireless router 2/3/4G LTE Ethernet/RS232/422/485/USBMagnetar-105
Properties and Benefits
- 1/2x WAN modem 2/3G/4G LTE
- 1x LAN Ethernet 10/100Mbps
- 1x RS232/485 virtual-com
- 1x RS232 virtual-com or 2x in version with RJ45 connectors
- Modes for RS interfaces: TCP Server, UDP Server
- 2x digital inputs, 1x 230V relay output, 1x low voltage relay output
- The functionality of IO ports implemented in accordance with the specific requirements of the customer.
- 1x USB OTG
- Static Routing, NAT, Masquerade
- Security mechanisms: Firewall, IPsec, Open VPN, GRE
- Management via HTTP, SNMPv2c / v3, HTTPS, SSH, CLI
- Working temperature from -40 to + 75 ° C
- Rugged metal housing IP-30 DIN
- DC power supply
Catalog card
Magnetar-105 wireless router
Product card
Haven’t found the answer to your bothering questions?
Supported transmission standards
| IEEE 802.3 10Base-T Ethernet |
| IEEE 802.3u 100Base-TX Fast Ethernet |
| IEEE 802.1Q VLAN |
Supported protocols
| TCP / IP, IPv4, UDP, ICMP |
| SNMP v1 / v2c / v3, DHCP Client |
| NTP Server, NTP Client, SMTP |
| HTTP, HTTPS, Telnet, SSH v2, Syslog |
| EtherNet / IP, SNMP Inform, Ipv6 |
| MIB |
| Firewall, NAT, Masquerade |
| Modes for RS interfaces: TCP Server, UDP Server |
| Static Routing |
| IPSEC, GRE, Open VPN |
Supported standards, recommendations and directives EMC, safety *
| PN-EN 55011:2012 |
| PN-EN 55024:2011/A1:2015-08 |
| PN-EN 60950-1:2007/A2:2014-05 |
| EMC 2004/108/WE |
| LVD 2006/95/WE |
| IEC 61000-4-2 |
| IEC 61000-4-3 |
| IEC 61000-4-4 |
| IEC 61000-4-5 |
| IEC 61000-4-6 |
| IEC 61000-4-8 |
| IEC 61000-4-11 |
| IEC 61000-4-12 |
| IEC 61000-4-29 |
| PN-ETSI 60529:2003/A2:2014-07 |
| PN-ETSI EN 301 511 V9.0.2:2011 |
| PN-ETSI EN 301 489-1 V1.9.2:2012 |
| PN-ETSI EN 301 489-7 V1.3.1:2006 |
| IEC 61000-6-5:2016-01 |
| IEC 61000-4-29:2004 |
Ethernet interfaces
| WAN modem 2/3 / 4G LTE |
| LAN / WAN 1x 10 / 100Mbps RJ45 |
| Protocols: TCP / IP, IPv4, UDP, ICMP, static routing |
| Security features: Firewall, IPsec, Open VPN, GRE |
Management
| HTTP / HTTPS, SSH, SNMPv2c / v3, SMTP, SNTP, CLI |
| Remote / local diagnostics, reading: S / N, IP, GSM status |
| Remote synchronization via NTP protocol |
| Remote and local password authentication |
| Save / export configuration and restore default configuration |
| Free remote / local firmware update |
| Configuration using SMS commands |
| Monitoring of GSM parameters, supply voltage level, operating temperature |
Inputs / Outputs
| 2x optically isolated digital inputs |
| 1x 230V relay output |
| 1x low voltage relay output |
| NO / NC configuration |
| The functionality of IO ports is implemented according to specific customer requirements |
| Possibility to send TRAP |
| Version with RJ45 connector on RS interface does not have IO interfaces (inputs / outputs) |
GSM modem
| 1 (2) x GSM 2 / 3G / (4G LTE) modem |
| CDMA / HSPA / UMTS / EDGE / LTE standards |
| Radio frequencies: 800/900/1800 / 2100MHz |
| 1 (2) x SIM card |
| 2 (3) x SMA antenna |
| Signaling of operating states and signal quality |
| Automatic logging and establishing a packet session in the APN, after unsuccessful attempts, a hardware restart of the device |
| The MAGNETAR-105-Z version can be equipped with only one GSM or RF modem |
USB Host
| 1x miniUSB OTG |
Power
| Range 9-36V DC |
| 18-60V DC range |
| Screw connection |
RS-232/485 ports
| The port has a galvanic separation |
| Baud rate 1200-115200bps |
| 1x RS232 or RS485 interface and 1x RS232 interface or 2x RS232 serial interfaces in the version with RJ45 connector. |
| Programmatic handling of RS selection |
| RJ45 or screw connectors depending on the version |
Work environment requirements
| Standard working temperature: -40 to + 75 ° C |
| Active cooling / heating elements are missing from the unit and no external sources are required |
| Standard operating ambient humidity: 0 to 95% (non-condensing) |
| Location type: class C in accordance with PN-EN 60870-2-2 – sheltered locations |
| Protection class in accordance with IP-30 |
Physical features
| Dimensions 135 x 125 x 99mm |
| Weight: up to 0.7 kg |
| Can be mounted on a DIN rail |
| Metal housing IP-30 |
More information can be found in the product catalog
Instructions, CE and DWG files available only to logged in users
See more
Offer
Current product offerings from BitStream.
Realizations
Complex projects implemented by BitStream.
Career
Current vacancies for technical and clerical positions.
Contact
Contact details of Bitstream.