Hyperion 300

Industrial, 10-port, managed Gigabit Ethernet switch, optional with RS232 / 485 serial interfaces (with the possibility of supporting the GPRS modem for remote management via GSM network), digital inputs, relay outputs and a 1-wire interface.

Managed Industrial Ethernet Switch Hyperion-300

Properties and Benefits

Optional features

Optional features under the license


Thanks to its reliability, Hyperion 300 is used in industries such as:



Uniformed services

Fuel industry

Intelligent transport


Catalog card


Ethernet Switch Hyperion-300

Product card

Haven’t found the answer to your bothering questions?

IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX Fast Ethernet
IEEE 802.3u 100Base-FX Fast Ethernet Fiber
IEEE 802.3ab 1000Base-T
IEEE 802.3z Gigabit Fiber
IEEE 802.3x Flow Control and Back-pressure
IEEE 802.1AB Link Layer Discovery Protocol (LLDP)
IEEE 802.1p Class of Service (CoS)
IEEE 802.1ad QinQ
IEEE 802.1D- Spanning Tree Protocol (STP)
IEEE 802.1D-2004 Rapid Spanning Tree Protocol (RSTP)
IEEE 802.1s Multiple Spanning Tree Protocol (MSTP)
IEEE 802.3ad Link Aggregation Protocol (LACP)
IEEE 802.1x Port Based Network Access Protocol
IEEE 802.3az EEE
IEEE 802.3af/at typ 1/2 do 30W
IGMP v1, v2, v3, MLD v1, v2, GMRP, GVRP,
SNMP v1/v2c/v3,
DHCP client/server,
 NTP client/server, SNTP,
HTTP, HTTPS, Telnet, SSH v2, Syslog
 EtherNet/IP, SNMP Inform, LLDP, RMON,
 IEEE1588 PTP v2 (only available in 30x.2
 Synchronous Ethernet G.8261 (only available on 30x.2)
MIB-II, Ethernet-Like MIB
IEEE 802.1x Port Based Network Access Protocol, EAP, TACACS+, RADIUS, NAS
OpenDNP3 (IEEE-1815, DNP3).
PN-EN 55011:2016
PN-EN 55035:2017-09
PN-EN IEC 62368-1:2020-11
EMC 2014/30/EU
LVD 2014/35/EU
PN-EN 60825-1:2014-11
IEC 61000-4-2
IEC 61000-4-3
IEC 61000-4-4
IEC 61000-4-5
IEC 61000-4-6
IEC 61000-4-8
IEC 61000-4-11
IEC 61000-4-12
IEC 61000-4-29
Ethernet connectors: 2x SFP 100/1000M/2.5Gbps, 2/6x SFP 1002/1000Mbps, 8/2x RJ45
  • (in Hyperion-301 version: 2 RJ45/SFP ports – combo), (100Mbps speed on Optical Interface works
    only with optical SFP inserts)
Matrix switching capacity: 20Gbps
 Forwarding: 17.9 Mpps
QoS: Support for 8 physical queues, Weighted Round Robin algorithm and Strict Priority queuing.
Priority settings based on: 802.1p PCP priorities, DSCP/ToS, port-based priority settings, TCP/UDP
port number-based priority configuration capabilities
VLANS: 4096 VLAN entries, 802.1Q, 802.1QinQ, private VLANs, VLAN translation.
Bandwidth control: filtering for incoming traffic of Broadcast, Multicast, Unknown DA or all
packets, outgoing traffic filtering for packets of all types, bandwidth limiting
IGMP snooping V1/V2/V3, IGMP Filtering/ Throttling, IGMP query, IGMP proxy reporting, MLD
snooping V1/V2
 RMON, MIB II, Port mirroring, DNS, IEEE802.1ab LLDP, LLDP-MED
Syslog – cooperation with the syslog server,
Port Mirroring: Monitoring traffic on selected ports
IEEE 802.3az: Energy Efficient Ethernet, 4 power saving modes
IEEE 802.1x Port Based Network Access Protocol, EAP, TACACS +, RADIUS – Authentication, Authorization and Accounting – AAA
Port Trunk: IEEE 802.3ad LACP or static aggregation
MAC address table: up to 8192 entries
IEEE 802.1x Port Based Network Access Protocol, EAP, TACACS+, RADIUS – authentication,
authorization and accounting functions – AAA

Network Redundancy:

  • ITU-T G.8032 Ethernet Ring (ERPS)
  • IEEE 802.1D Spanning Tree (STP)
  • IEEE 802.1D-2005 Rapid Spanning Tree Protocol (RSTP).
  • IEEE 802.1s Multiple Spanning Tree Protocol (MSTP)
Transmission rate 0 – 16.3 kbit/s
Range ≤ 100m
Connector: RJ-45
Input dedicated to MOD-EXT-IO module or T/H sensor
UDP / TCP; server / client / virtualcom

Transmission speed:

  • 0-115.2 kbit / s for RS232
  • 0-230 kbit / s for RS 485

Interface type configuration:

  • 1x RS485 – 2/4 wire or 1x RS232
  •  2x port with RS232 interface
Connector: RJ-45
Number of outputs – 4
Type of outputs – “relay contact”
Maximum switching current – 0.5A 48VDC
Connector: RJ-45
Number of inputs – 2
Galvanically isolated inputs
Input type – dry contact
 Connector: RJ45
DC power supply, 12-60V VDC /0.95-0.16A (9.5W)
Two power inputs, redundant power supply for DC power supply
DC/AC power supply, 80-350VDC/75-240VAC (version available only without PoE function)
Screw connector for AC or DC power supply
SNMP v1/2c/3, SSH
HTTP / HTTPS protocol – management via a web browser
“Privilege level” – permission level configuration – read / write, independently configured for many users
Working temperature: -40 to + 85 ° C with a minimum air flow of 0.4 m / s
Working temperature: -40 to + 70 ° C with a minimum air flow of 0.0m / s
The working time at the maximum temperature of + 85 ° C is up to 16 hours
Standard operating ambient humidity: 0 to 95% (non-condensing)
Location type: class C in accordance with PN-EN 60870-2-2 – sheltered locations
Protection class in accordance with IP-30
Can be mounted on a DIN rail
Weight: 0.90kg
 Metal housing IP-30
Dimensions 135x125x99mm
Compliant with IEEE802.3af, IEEE802.3at standards,
Power available per port up to 30W
For 55VDC power supply, the maximum total PoE power is 240W

More information can be found in the product catalog

Instructions, CE and DWG files available only to logged in users

See more


Current product offerings from BitStream.


Complex projects implemented by BitStream.


Current vacancies for technical and clerical positions.


Contact details of Bitstream.