Hyperion 200

Managed industrial Ethernet switch with PTPv2 time synchronization server function and 4x 1 / 2.5 / 10Gbps and 8 / 16x 10M / 100M / 1G RJ45 PoE ÷ PoE ++ or 8x 100M / 1G SFP interfaces and Quadbox function with PRP support

Please contact the seller
See the Hyperion 200 datasheet

Managed Industrial Ethernet Switch Hyperion-200

Properties and Benefits

  • Family of industrial switches equipped with 4x SFP / SFP + 10 / 2.5 / 1Gbps slots and 8 / 16x 10M / 100M / 1Gbps RJ45 ports or 100M / 1Gbps SFP slots
  • Additional NMI UTP RJ45 10 / 100Mbit / s management port
  • Protocol support: STP, RSTP and MSTP
  • ITU-T G.8032 ERPS support, connection reconfiguration in <20ms, up to 64 rings simultaneously
  • Transmission security using IEEE 802.1ae MACsec # - encryption and data integrity with a 128-bit AES key on each UTP port
  • PRP (IEC 62439-3 Clause 4) support on all ports or optional Quadbox function
  • HSR (IEC 62439-3 Clause 5) security support on dedicated ports
  • Standard IEEE 1588-2008v.2 (PTPv2) : precise time synchronization protocol, hardware time stamping with profile 1588
  • Energy saving with Energy Efficient Ethernet (EEE)
  • Support for the PROFINET Conformance Class A protocol
  • Ethernet OAM support (Link OAM and Service OAM)
  • Standard secondary overvoltage protection in UTP modules on RJ-45 ports, ITU-T K.44 4kV 10 / 700us only in the transmission path
  • DDMI - SFP modules monitoring function
  • Equipped as standard with I / O functions: 4 'cc' input and 2 outputs interface for monitoring, alarm and control purposes
  • Management of IPv4, IPv6, Web, telnet, SSH and console, SNMP v1,2,3
  • Access security SNMPv3, HTTPS, SSH and IEEE802.1x, Radius, Tacacs + - AAA
  • The switch is designed in accordance with the requirements of IEC61850-3 and IEEE1613 standards for power substations
  • Working temperature: -40 to + 85 ° C under the right conditions
  • Rugged metal housing for mounting on a DIN rail
  • Power supply 36-60 VDC or 80-360 VDC / 75-270 V AC

Optional functions

  • L3 routing support - static routing
  • PoE ÷ PoE ++ support up to 90W per UTP port (on all ports max. 500W), Watchdog PoE
  • Available version of the time server with a GPS module for time synchronization, equipped with OCXO generators of different stability
  • Version available with HSR / PRP lossless redundancy module IEC62439-3 Clause 5 & 4
  • A version with a time synchronization input / output module is available

Optional features included with the license

  • Extension with the IEEE 1588-2008v.2 (PTPv2) Power Profile protocol; real-time synchronization for energy applications in accordance with IEEE C37.238-2011, C37.238-2017 standards; IEC61850-9-3,
  • Activation of the Synchronous Ethernet function G.8261

Features optional with GPS license

  • Signal Input / Output 1PPS (One Pulse Per Second)
  • 10Mhz clock signal input / output
  • ToD (Time-of-Day) signal input / output
  • Synchronization signal output E1 G.703, G.704

Application

Thanks to its reliability, Hyperion 200 is used in industries such as:

Energetics

CCTV

Fuel industry

Catalog card

Ethernet Switch Hyperion-200

Product card

Download

Haven’t found the answer to your bothering questions?

Contact an expert

IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX Fast Ethernet
IEEE 802.3u 100Base-FX Fast Ethernet Fiber
IEEE 802.3ab 1000Base-T Gigabit Ethernet
IEEE 802.3ae 10GBASE-SR / LR / ER / ZR (SFP +) 10 Gigabit Ethernet
IEEE 802.3z Gigabit Fiber
IEEE 802.3x Flow Control and Back-pressure
IEEE 802.1AB Link Layer Discovery Protocol (LLDP)
IEEE 802.30ah Link OAM
IEEE 802.1p Class of Service (CoS)
IEEE 802.1Q VLAN
IEEE 802.1ad QinQ
IEEE 802.1d – Spanning Tree Protocol (STP)
IEEE 802.1w – Rapid Spanning Tree Protocol (RSTP)
IEEE 802.1s – Multiple Spanning Tree Protocol (MSTP)
IEEE 802.3ad Link Aggregation Protocol (LACP)
IEEE 802.1x Port Based Network Access Protocol
IEEE 802.3az EEE
IEEE 802.3af / at type 1/2 and PoE ++ up to 90W / port
IEEE 1588-2008 v2 PTP
Optional extension with Power Profile IEEEC37.238-2011, IEEEC37.238-2017
Optional also Synchronous Ethernet, G.8261: (Timing and synchronization aspects in packet networks)
IGMP v1, v2, v3, MLD v1, v2, GMRP, GVRP
SNMP v1 / v2c / v3, DHCP Client
NTP, SMTP, RMON
US
HTTP, HTTPS, Telnet, SSH v2, Syslog
EtherNet / IP, SNMP Inform, LLDP-MED
IPv4, IPv6, ARP, ICMP, TCP, UDP, DNS
MIB-II, Ethernet-Like MIB
IEEE 802.1x Port Based Network Access Protocol, EAP, TACACS +, RADIUS
EN 55022:2010/AC:2011
PN-EN 55024:2011
PN-EN 60950-1:2007/A2:2014-05
PN-EN 60950-1:2007/A2:2014-05
2014/30/UE
2014/35/UE
PN-EN 60825-1:2014-11
IEC 61000-4-2
IEC 61000-4-3
IEC 61000-4-4
IEC 61000-4-5
IEC 61000-4-6
IEC 61000-4-8
IEC 61000-4-11
IEC 61000-4-12
IEC 61000-4-29
Ethernet connectors: 4 x 1G / 2.5G / 10Gbps SFP +, 8 / 16x 10/100 / 1000Mbps RJ45 ports or 100M / 1000M SFP slots
Non-blocking switching matrix: 160Gbps
QoS: Support 8 physical queues, Weighted Round Robin algorithm and Strict Priority Queuing. Priority settings based on: PCP 802.1p, DSCP / ToS priorities, port priority settings, the ability to configure priorities based on TCP / UDP port numbers
VLAN: 4094 VLAN entries, 802.1Q, 802.1QinQ, Private VLAN, VLAN translation
Flow Control: Flow Control – controls sent and received packets to prevent buffer overflow, i.e. data loss
Storm protection: filtering for inbound traffic of Broadcast, Multicast, Unknown DA or all packets, filtering for outgoing traffic for all types of packets, rate limiting
IGMP snooping: V1 / V2 / V3, IGMP Filtering / Throttling, IGMP query, IGMP proxy reporting, MLD snooping V1 / V2
Syslog – cooperation with the syslog server
Port Mirroring: Monitoring traffic on selected ports
IEEE 802.3az: Energy Efficient Ethernet, energy reduction, 4 modes
Security: HTTP / HTTPS, SSL / SSH, monitoring of changes in optical link parameters for violations, IEEE 802.1x Port Based Network Access Protocol, EAP, TACACS +; RADIUS – Authentication, Authorization and Accounting – AAA functions
Port Trunk: IEEE 802.3ad LACP or Static Aggregation
RMON, MIB II, Port mirroring, DNS, NTP, IEEE802.1ab LLDP, LLDP-MED
MAC address table: up to 32k entries
Optional L3 – static routing
Network redundancy
  • ITU-T G.8032 Ethernet Ring (ERPS)
  • IEEE 802.1d – Spanning Tree (STP)
  • IEEE 802.1w – Rapid Spanning Tree Protocol (RSTP)
  • IEEE 802.1s – Multiple Spanning Tree Protocol (MSTP)
  • IEC 62439-3 Clause 4 and 5 support Ethernet Ring (HSR / PRP)
    		•
    OTDR test in the UTP module: Each RJ45 port can perform a OTDR test of all pairs (4 pairs for 1000Base-T and 2 pairs for 10 / 100BaseTx) for a twisted pair cable, i.e. short circuit or break in pairs diagnosis and the total length of the cable to the next device active
    ITU K.44 – built in TRX.1 modules on RJ-45 ports only in the transmission path secondary, 4kV, 10 / 700us overvoltage protections in accordance with the requirements of: “Resistibility tests for telecommunication equipment exposed to overvoltages and overcurrents – Basic Recommendation”
    Number of inputs – 4
    Input type – digital, potential-free
    Connector: screw
    Number of outputs – 2
    Type of outputs – relay NO / NC
    Maximum switching current – 0.5A 60VDC with resistive load
    Connector: screw
    Full operability after a cold start after a maximum of 30 seconds.
    Time: 650,000 hours
    Standard: Telecordia, SR-332
    SNMP v1 / 2c / 3, SSH
    HTTP / HTTPS protocol – management via a web browser
    SSH v2, TELNET
    Local CLI console (RS-232)
    “Privilege level” – permission level configuration – read / write, independently configured for many users
    Lossless network redundancy module
    PRP port support for lossless network redundancy
    8 or 16 RJ45 / SFP ports with PRP (Parallel Redundancy Protocol) support for lossless network redundancy
    Support for IEC 62439-3 Clause 4
    Support for the IEEE 1588v2 PTP protocol
    52-channel receiver cooperating with GPS, GLONASS, BeiDou, Galileo systems
    Antenna input with SMA connector and support for active antennas
    GPS receiver sensitivity: -165dBm / -160dBm
    Accuracy of GPS PPS signal: +/- 30ns
    Possibility to equip with stable on-board generators with different parameters:
    • OCXO generator with stability in the temperature range – 40 to + 85 ° C at the level of +/- 20 ppb and holdover holdover time in the range of ± 1.5 µs for a minimum of 0.5 hours
    • OCXO generator with temperature stability – 40 to + 85 ° C at the level of +/- 2 ppb and holdover holdover time in the range of ± 1.5 µs for a minimum of 4 hours
    • OCXO generator with temperature stability – 40 to + 85 ° C at the level of +/- 0.2 ppb and holdover holdover time in the range of ± 1.5 µs for a minimum of 72 hours
    Supports IEEE 1588 v2 Precision Time Protocol
    Supports G.8261 Synchronous Ethernet (SyncE) support
    The device is equipped with an on-board TCXO generator
    IEEE 1588-2008 v2 PTP – standard support for synchronization with the profile 1588
    • Transparent clock: peer to peer, end to end with one step, two step
      • Time error typically 50ns
    • Boundary clock
      • Time error for BC (Boundary clock) typically <200ns
      • Time error for BC (Boundary clock) with SyncE typically <100ns
      • Time error for BC (Boundary clock) with SyncE 50ns for ΔT <± 5 ° C
  • Slave
    		•
    Optional synchronization with Power Profile IEEEC37.238-2011, IEEEC37.238-2017
    Optional also Synchronous Ethernet, G.8261: (Timing and synchronization aspects in packet networks)
    Signal Input / Output 1PPS (One Pulse Per Second)
    10Mhz clock signal input / output
    ToD (Time-of-Day) input / output – the output can be reconfigured into an IRIG-B signal
    DC 36-60V power supply
    DC80-360V power supply; AC 75-270V
    Optional two DC power inputs – redundant
    Screw connection for AC or DC power
    Total power consumption (without PoE ports) <40W
    Compliant with IEEE802.3af, IEEE802.3at
    Power available for each port up to 90W
    For 55VDC power supply, the maximum total PoE power is 500W
    Dimensions [141 mm or 183x135x120] mm
    Weight up to 2.5 kg
    Mounting DIN rail or free-standing
    Metal housing
    Working temperature: -40 to + 85 ° C with a minimum air flow of 0.4 m / s
    Working temperature: -40 to + 70 ° C with a minimum air flow of 0.0m / s
    The working time at the maximum temperature of + 85 ° C is up to 16 hours
    Standard operating ambient humidity: 0 to 95% (non-condensing)
    Location type: class C in accordance with PN-EN 60870-2-2 – sheltered locations
    Protection class in accordance with IP-30

    More information can be found in the product catalog

    Download the Hyperion 200 catalog

    Instructions, CE and DWG files available only to logged in users

    See more

    Offer

    Current product offerings from BitStream.

    Realizations

    Complex projects implemented by BitStream.

    Career

    Current vacancies for technical and clerical positions.

    Contact

    Contact details of Bitstream.